Digital Indicating Device 800


	Pressure Transmitter
	Differential Pressure Transmitter
	Electronic Pressure Switches
	Pressure Level Transmitter
	Overpressure And Vacuum Switches
	Differential Pressure Switches
	Digital Indicating Device
	Force Cells
	Pressure Measuring Cells

Digital Indicating Device

Type 800

mbar / bar with
2 limit values

Pressure range gradation and executions see order code selection table
(PDF Datasheet)

Technical data
Indicator	Liquid-crystal, 31/2 digit, mbar/bar
	Other types on request
	Character height 12.7 mm
Accuracy	+/- 1 digit at 23°C ambient temperature
	Reproducibility:	< 1digit
	Long-time stability:	1 digit after 3 months
	Hysteresis:	2 digit fixed
Temperature influences	Temperature coefficient:	Zero drift: typically 30 pp M/°C
	Amplification drift:	typically 25 pp M/°C
	Working temperature range:	-5 to +45 °C
	Max. air humidity	95% non condensing
Power supply	Max. signal current cable length:	2000 meters, 2-wire
	Max. load signal current:	500 Ohm (= 10V/20 mA)
	Power supply:
	230 Volt, 50/60 Hz - 5,5 VA
	24 Volt, 50/60 Hz - 5,5 VA
	24 Volt volts direct current
	Type of connection:	8-pole screw terminal for 800.8
		6+8-pin for 800.7
Input	Input signal:
	0 - 10 VDC
	0 - 10 VDC
	0 . 20 mA, 4 - 20 mA
	Special signals on request
Outputs	Signal current output::
	0 - 20 mA or 4 - 20 mA,
	0 - 10 VDC or any desired range, independent of the indicator
	Relay contacts: Loading 6A/220 VAC at ohmic load
Limit values	Adjustment of limit values:
	Each value is adjusted with a 20-turn potentiometer with screwdriver slot.
	Limit value indication: With monostable toggle switch,
	upper/lower value on the digital display.
	Indication of limit value status:
	Each with a red LED lamp.
Protection class	P40 or IP54 with cover

top