DL7
Differential Pressure Data Logger
|
Also Measures and Logs Temperature,
Self-Powered, 2-Channel, Compact
|
Monitor
and Record low differential pressures and temperature
with the Model DL7 Differential Pressure
Data Logger. Unit includes an on-board
thermistor for ambient temperature measurement.
Sampling rates are user selectable from 0.04 seconds
to 8 hours with First-in first-out or Fill-then-stop
sampling options. Loggers can store up to 21,500
readings and operate totally independently from
any external power supply with built-in lithium
battery. Use Model DL200 Windows® software
(sold separately) to quickly program the logger
or upload data to a computer. The Series DL7 logger
is ideal for monitoring air duct velocity, testing
and balancing HVAC systems, or verifying room
pressure. |
No. of
Channels: Two; internal thermistor, and
a differential pressure sensor.
Internal Thermistor Range: -40
to 158°F (-40 to 70°C).
Compensated Temp Range: 32 to
158°F (0 to 70°C).
Memory Size: 21,500 readings.
Accuracy: ±0.05 w.c.
Thermal Accuracy: ±0.5%
FS.
Clock Accuracy: ±2 sec/day
plus one sampling interval.
Resolution: ±0.01? w.c.
Internal Thermistor Resolution: 0.7°F
(0.4°C), R25 value equal to 10,000 [10k
@ 25°C (77°F)].
Resolution: 12 bits (1 in 4096).
Nonlinearity: ±0.05% FS
(BFSL).
Hysteresis and Repeatability:
±0.05% FS.
Drift: ±0.5% FS/yr.
Sampling Methods: Continuous
(firstin, first-out: not available from 40 ms
to 8 sec.), stop when full (fill-then-stop), or
delayed start.
Sampling Rates: Selectable from
0.04 seconds to 8 hours.
Ambient Operating Temperature/RH:
-40 to 158°F (-40 to 70°C), 0 to 95% RH,
non-condensing.
Connection: Two 1/8? I.D. permanent
protective tubing.
Computer Requirements: IBM compatible
386 or above and Windows® 3.1 or later with
2 MB RAM and 2 MB hard drive disk space, one serial
port.
Service: Dry air and noncorrosive
gases.
Max. Pressure Rating: 5X rated
pressure.
Power Requirements: Built-in
3.6V Lithium battery.
Power Consumption: 5-10 µA.
Housing Material: Polyphenylene
Ether and Polystyrene PPE & PS.
Weight: 4 oz (110 g).
Agency Approvals: CE. |