Profile

Pressure Transmitter
Differential Pressure Transmitter
Electronic Pressure Switches
Pressure Level Transmitter
Overpressure And Vacuum Switches
Differential Pressure Switches
Digital Indicating Device
Force Cells
Pressure Measuring Cells
 

  Electronic pressure switches

Electronic pressure switches
Type 511

Relative pressure
-1 up to 600 bar
Absolute pressure
0 up to 25 bar

Pressure range gradation and executions see order code selection table
(PDF Datasheet)
  





Description  

Electronic Pressure Switches Type 511

Technical data
Overload 3.0x Full scale at   -1 ... 4 bar
Overload allowed 2.5x Full scale at   6 ... 600 bar
  but as a maximum    900 bar
  Higher overload on request
Rupture pressure 3.0x Full scale at     -1 ... 4 bar
  2.5x Full scale at     6 ... 600 bar
  but as a maximum     900 bar
  Higher rupture pressure on request
  Patented media stop system to prevent media egress when
  exceeding rupture pressure range (> 40 bar nominal value)
Accuracy Repeatability
< +/- 0.1% fs
  Accuracy of switching point adjustments
< +/- 1% fs
Housing material Casing: Stainless steel 1.4305 (AISI 303)
Application temperature Medium temperature with sealing:
  FPM
- 15 ... + 125 °C
  NBR
- 25 ... + 85 °C
  FPM spec. - 40 ... + 150 °C
  Ambient temperature 85 °C
Temperature influences TK0 < +/- 0.015% fs/K
  TKE < +/- 0.015% fs/K
  temperature range - 40 ... +85 °C
Power supply 8 ... 33 VDC
Output Semiconductor switching output:
  Highside-Switch (PNP) max. 150 mA
  Lowside-Switch (NPN) max. 500 mA
  at max. power supply voltage.
  Output with self-resetting thermal excess-current release
  Leak currency < 10 µA
  Short circuit-proof and protected against polarity reversal.
  Each connection against other with max. +/- supply voltage.
Current consumption < 4 mA
Adjustment of Factory set:
Switching points Upper switching point
8 ... 100% fs
  Lower switching point 5 ... 97% fs
  Min. hysteresis 3%
Copyright © 2008. ALM .
Terms of Use
English Arabic French Spanish