Technical
data |
| Overload |
2x
Measuring range (fs) |
| Rupture
pressure |
3x
Measuring range (fs) |
| Accuracy |
Total
of linearity, hysteresis and repeatability |
| |
<
+ 1% FS |
| |
Adjustment
accuracy zero point and full scale (repeatable,
stable) |
| |
<
+ 1.5% FS |
| Materials
in contact |
Ceramic/fiber-reinforced
plastic see order code selection table |
| with
the medium |
The
Medium Sealing material FPM, EPDM, NBR |
| Temperature
influences |
Medium
temperature |
0
°C to 90 °C |
| |
Ambient
temperature |
10
°C to 60° C |
| |
TC zero point |
< + 0.06%
FS/°C |
| |
TC sensitivity |
< + 0.015%
FS/°C typically |
| Load cycle |
< 50 Hz |
| Dynamic response |
Suitable for static
and dynamic measurements. |
| |
Response time
< 5 ms |
| Signal and power supply |
Signal |
Speisung |
| |
0.5 - 2.5 V |
5 VDC + 10% 3-wire cable |
| |
0.5 - 3.5 V |
8.5 - 30 VDC 3-wire cable |
| |
Nominal voltage
to declare. |
| |
Short circuit-proof
and protected against polarity reversal. |
| |
For connector-versions
only mechanically protected. |
| |
The correct wiring
acc. to the scheme has to be guaranteed |
| |
By the OEM-customer. |
| Load |
0.5 - 2.5 V >10
kOhm / <100 nF |
| |
0.5 - 3.5 V >10
kOhm / <100 nF |
| Current consumption |
0.5 - 2.5 V <5
mA |
| |
0.5 - 3.5 V <5
mA |
| Electrical connections |
Connector AMP Duoplug |
IP 00 |
| |
Connector DIN 43650A |
IP 54 |
| |
Cable 1.5 m |
IP 54 |
| Calibration |
Calibrated in
the factory |
